Logitech Wingman FF Wiring
The Logi has all its electronics in the wheel itself. So it should be quite easy to replace the pedals totally without any bigger problems. Following I list the relation between the different pedal-connectors, as there are:

• Power
• serial 9-pin female(short: S)
• Wheel connector 25-pin female (short: W)

Also there are the two potis for brake and pedal:

• Poti gas pedal (PG)
• Poti brake pedal (PB)

Potis have each 3 pins (as usual), where the outer pins are connected between PB and PG:

• left pin PG to left pin PB and to S5, W11, W7, W1, W17
• right pin PG to right pin PB and to W14
• middle pin PG to W16
• middle pin PB to W15

Wheel connector 25 pin:

• W1 to S5
• W2 to S3
• W3 to S2
• W4 to S7
• W7 to S5
• W8 to S1
• W9 to S8
• W11 to S5
• W17 to S5
• W22 to S9

Powersupply:

20V DC, 1,5 Amp, not regulated (idling at about 15 V)

• + to W18, W25
• - to W10 and casings of W and S

Please let me know asap, if anything is wrong or incomplete. I'm also open for some nice diagrams, which I can publish here.

Email:     JensSchumi<nospam a_t nospam>pd.jaring.my      

The usage of the above data is under anybody's own responsibility. If anybody blows anything, bad luck guys.